Page | 1 ZuniDigital Travel Connect Portable Wireless Router with USB Charging Station User’s Guide ZTRP150
Page | 10 WIRELESS SETUP (WISP MODE) ABOUT WISP MODE This mode allows the ZuniDigital Travel Connect to use an existing wireless network signal as
Page | 11 Step 2 - Attach Power Cable Plug the AC adapter into a wall socket and plug the power tip into the Travel Router’s 5v power port. Please
Page | 12 Step 5 - Enter Setup Wizard Click “Run Setup Wizard” from the navigation plane on the left side of the screen. Step 6 - Select Wi-Fi Ne
Page | 13 Step 8 - Connection Results If the password was accepted by the wireless network, you will get a “connection successful” message. If this
Page | 14 Step 10 – Configure WAN (Internet) Parameters This step lets you configure the router to utilize the broadband signal provided by the Inte
Page | 15 Step 12 - Apply Wi-Fi Network Security Settings By default, the ZuniDigital Travel Connect broadcasts as an OPEN network with no data encr
Page | 16 DEVICE CHARGING Follow these instructions to charge peripherals. The USB charging ports provide simultaneous recharging of two portable e
Page | 17 Step 3 For QuickCharging devices such as tablet computers and e-readers, connect one end of the USB charging cable into the USB charging p
Page | 18 Frequently Asked Questions General Questions What is the ZuniDigital Travel Connect? ZuniConnect™ Travel is a lightweight portable router
Page | 19 premium travel routers features Wireless IN / Wireless OUT technology that allows you to create a personal Wi-Fi network from an existing
Page | 2 Table of Contents Introduction…..2 Retail Package Contents…..2 Safety Information…..2 Product Overview…..3 Key Features…..4 Other Features…
Page | 20 Troubleshooting Information If you need further assistance you can reach our product support team by phone toll-free at 1(888)213-8529, or
Page | 21 WISP MODE PROBLEM POSSIBLE SOLUTIONS I cannot connect to the Internet wirelessly using the travel router, and the ZuniConnect SSID is not
Page | 22 Product Specifications ROUTER Operation Modes: - Router / AP - Wireless ISP (Wi-Fi IN/OUT) Wireless Standards - IEEE 802.11N - IEEE 80
Page | 23 - Max Output: 2.0 Amp - Typical Output: 1.6 Amp COMMON SPECIFICATIONS Mechanical - Dimensions: 3.86” x 2.37” x 0.65” - Weight:
Page | 24 Warranty Information Warranty Statement Should our Travel Router fail to perform within the warranty period, ZuniDigital will replace the
Page | 25 FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the lim
Page | 3 Product Overview Designed for people on-the-go, this travel friendly device lets you create a secure wireless network whenever a wired Bro
Page | 4 Key Features Intelli+IP Sensing Technology – Patent pending technology that detects the main network’s IP address, and if there is a networ
Page | 5 Setup Instructions WIRELESS SETUP (ROUTER MODE) ABOUT ROUTER MODE For this mode the ZuniDigital Travel Connect uses a wired Broadband conn
Page | 6 Step 2 - Attach Power Cable Plug the AC adapter into a wall socket and plug the power tip into the Travel Router’s 5v power port. Please w
Page | 7 Step 5 – Enter the Setup Wizard Click the “Run Setup Wizard” button on the travel router’s main page, or from the navigation menu on the le
Page | 8 Step 8 - Configure WAN (Internet) Parameters This step lets you configure the router to utilize the broadband signal provided by the Intern
Page | 9 Step 10 - Apply Wi-Fi Network Security Settings By default, the ZuniDigital Travel Connect broadcasts as an OPEN network with no data encry
Comments to this Manuals